full information of celling fans
1.A.C. Fans The fans that run on A. C. supply are called A. C. fans are the most commonly used of these fans.
2.D.C. Fans The fans that run on DC supply are called D.C. They are called fans, they are used less and they are prepared on special order only.
3. A. C. Fans, D. C. Fans Fans that run on both A. C. and D. C. supplies are also called A. C. / D. C. fans or Universal fans. These are of different types depending on their use.
Most ceiling fans are used in today's time because in every house you will find one or two ceiling fans or even more ceiling fans instead of other fans like table fan, cabin fan hooked under the ceiling of a room. Hanging in etc. • The fan used is called ceiling fan. The size of the ceiling fan is taken from the diameter made by the length of the blade, their size is different, the electrical section of the ceiling fan is different.
A ceiling fan is a mechanical fan installed on the ceiling of a room or on the ceiling of a bus, train, etc., which is often electrically operated. It hangs from the ceiling and uses rotating blades attached to the hub to propel the air in the room. Ceiling fans usually spin more slowly than other types of fans (such as an electric table fan). These fans create a slow movement in the air of the room and feel good when this moving air touches the person's body. In fact, fans never reduce the temperature of the air in the room, as do air-conditioning equipment. Looking very closely, ceiling fans only slightly heat the air in the room because some heat is generated in the fan motor (copper loss + iron loss) and some heat is also due to the friction of the air with the fan blades. is born. The good thing about these fans is that they use very little electricity.
1. Stator: Two types of winding are done on the stator, one The starting winding and the other running winding The stator is a soft, circuitous, fixed part connected by a pipe ride.
2. Rotor Ceiling Fan Rotor as Squirrel Cage Induction Motor It is like a rotor which rotates around the stator, thus fan blades are fitted.
3. Capacitor to automate single phase motor
Requires the use of a capacitor, so a capacitor of 2 or 2.5 microfarads is used in the starting size of the ceiling fan.
4. Regulator to control the speed of the fan or Regulator is used. There is another advantage of using a regulator that we can also save our electricity, if we do not need to run the fan fast, then we can also save electricity by running it at low speed. And today in the market you will also get to see fans controlling the speed with remote, which you can increase or decrease its speed even with the help of remote just sitting.
Health tech
tech and earn